From 525e0eaf9fcc14c3a61861917d8e6676695ac057 Mon Sep 17 00:00:00 2001 From: Adrian Cowan Date: Tue, 27 May 2025 23:23:25 +1000 Subject: [PATCH] Bind consul on all interfaces to fix issues with nodes finding each other. Also expose traefik to make diagnostics of issues easier. --- 1-nixos-node/configuration.nix | 5 +++-- 1-nixos-node/terraform.tfstate | 10 +++++----- 1-nixos-node/terraform.tfstate.backup | 10 +++++----- 3 files changed, 13 insertions(+), 12 deletions(-) diff --git a/1-nixos-node/configuration.nix b/1-nixos-node/configuration.nix index b58e292..bd9fde4 100644 --- a/1-nixos-node/configuration.nix +++ b/1-nixos-node/configuration.nix @@ -69,6 +69,7 @@ interface.bind = "${bind_interface}"; interface.advertise = "${bind_interface}"; extraConfig = { + client_addr = "{{ GetPrivateInterfaces | exclude \"type\" \"ipv6\" | join \"address\" \" \" }} {{ GetAllInterfaces | include \"flags\" \"loopback\" | join \"address\" \" \" }}"; %{if bootstrap ~} bootstrap_expect = 1; %{endif ~} @@ -98,14 +99,14 @@ ]; # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul. - networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ]; + networking.firewall.allowedTCPPorts = [ 80 443 8081 4646 4647 4648 8300 8301 ]; networking.firewall.allowedUDPPorts = [ 8301 ]; # Copy the NixOS configuration file and link it from the resulting system # (/run/current-system/configuration.nix). This is useful in case you # accidentally delete configuration.nix. system.copySystemConfiguration = true; - + # Defines the initial NixOS version for compatibility with older application data. # Do NOT change this value after installation without careful consideration. system.stateVersion = "24.11"; # Did you read the comment? diff --git a/1-nixos-node/terraform.tfstate b/1-nixos-node/terraform.tfstate index 473beef..a4f6acc 100644 --- a/1-nixos-node/terraform.tfstate +++ b/1-nixos-node/terraform.tfstate @@ -1,7 +1,7 @@ { "version": 4, "terraform_version": "1.11.4", - "serial": 236, + "serial": 251, "lineage": "db7dcf21-a255-0ec4-c8b8-d4a7559b3768", "outputs": {}, "resources": [ @@ -15,9 +15,9 @@ "index_key": "jaglan-beta-m01", "schema_version": 0, "attributes": { - "id": "3562085774175912678", + "id": "6048275408611354621", "triggers": { - "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m01\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n bootstrap_expect = 1;\n };\n client = {\n enabled = true;\n host_volume = {\n traefik = {\n path = \"/opt/traefik\";\n read_only = false;\n };\n postgres = {\n path = \"/opt/postgres\";\n read_only = false;\n };\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"eno1\";\n interface.advertise = \"eno1\";\n extraConfig = {\n bootstrap_expect = 1;\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n # Create a directory for traefik to store its data\n \"d /opt/traefik 0755 root root -\"\n # Create a directory for postgres to store its data\n \"d /opt/postgres 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n\n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" + "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m01\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n bootstrap_expect = 1;\n };\n client = {\n enabled = true;\n host_volume = {\n traefik = {\n path = \"/opt/traefik\";\n read_only = false;\n };\n postgres = {\n path = \"/opt/postgres\";\n read_only = false;\n };\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"eno1\";\n interface.advertise = \"eno1\";\n extraConfig = {\n client_addr = \"{{ GetPrivateInterfaces | exclude \\\"type\\\" \\\"ipv6\\\" | join \\\"address\\\" \\\" \\\" }} {{ GetAllInterfaces | include \\\"flags\\\" \\\"loopback\\\" | join \\\"address\\\" \\\" \\\" }}\";\n bootstrap_expect = 1;\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n # Create a directory for traefik to store its data\n \"d /opt/traefik 0755 root root -\"\n # Create a directory for postgres to store its data\n \"d /opt/postgres 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 8081 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n \n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" } }, "sensitive_attributes": [] @@ -26,9 +26,9 @@ "index_key": "jaglan-beta-m20", "schema_version": 0, "attributes": { - "id": "4328251701095935897", + "id": "4501962519001291201", "triggers": { - "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m20\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n };\n client = {\n enabled = true;\n host_volume = {\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"ens2\";\n interface.advertise = \"ens2\";\n extraConfig = {\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n\n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" + "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m20\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n };\n client = {\n enabled = true;\n host_volume = {\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"ens2\";\n interface.advertise = \"ens2\";\n extraConfig = {\n client_addr = \"{{ GetPrivateInterfaces | exclude \\\"type\\\" \\\"ipv6\\\" | join \\\"address\\\" \\\" \\\" }} {{ GetAllInterfaces | include \\\"flags\\\" \\\"loopback\\\" | join \\\"address\\\" \\\" \\\" }}\";\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 8081 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n \n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" } }, "sensitive_attributes": [] diff --git a/1-nixos-node/terraform.tfstate.backup b/1-nixos-node/terraform.tfstate.backup index 241ba09..e2e479d 100644 --- a/1-nixos-node/terraform.tfstate.backup +++ b/1-nixos-node/terraform.tfstate.backup @@ -1,7 +1,7 @@ { "version": 4, "terraform_version": "1.11.4", - "serial": 231, + "serial": 246, "lineage": "db7dcf21-a255-0ec4-c8b8-d4a7559b3768", "outputs": {}, "resources": [ @@ -15,9 +15,9 @@ "index_key": "jaglan-beta-m01", "schema_version": 0, "attributes": { - "id": "822625592985314692", + "id": "375315072123105414", "triggers": { - "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m01\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n bootstrap_expect = 1;\n };\n client = {\n enabled = true;\n host_volume = {\n traefik = {\n path = \"/opt/traefik\";\n read_only = false;\n };\n postgres = {\n path = \"/opt/postgres\";\n read_only = false;\n };\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"eno1\";\n interface.advertise = \"eno1\";\n extraConfig = {\n bootstrap_expect = 1;\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n #client_addr = \"127.0.0.1 192.168.1.235\";\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n # Create a directory for Traefik to store its data (tls certs, etc.)\n \"d /opt/traefik 0755 root root -\"\n # Create a directory for Postgres to store its data\n \"d /opt/postgres 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n\n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" + "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m01\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n bootstrap_expect = 1;\n };\n client = {\n enabled = true;\n host_volume = {\n traefik = {\n path = \"/opt/traefik\";\n read_only = false;\n };\n postgres = {\n path = \"/opt/postgres\";\n read_only = false;\n };\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"eno1\";\n interface.advertise = \"eno1\";\n extraConfig = {\n client_addr = \"{{ GetPrivateInterfaces | exclude \\\"type\\\" \\\"ipv6\\\" | join \\\"address\\\" \\\" \\\" }} {{ GetAllInterfaces | include \\\"flags\\\" \\\"loopback\\\" | join \\\"address\\\" \\\" \\\" }}\";\n bootstrap_expect = 1;\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n # Create a directory for traefik to store its data\n \"d /opt/traefik 0755 root root -\"\n # Create a directory for postgres to store its data\n \"d /opt/postgres 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n \n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" } }, "sensitive_attributes": [] @@ -26,9 +26,9 @@ "index_key": "jaglan-beta-m20", "schema_version": 0, "attributes": { - "id": "429768676960285091", + "id": "7569759743571304983", "triggers": { - "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m20\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n };\n client = {\n enabled = true;\n host_volume = {\n traefik = {\n path = \"/opt/traefik\";\n read_only = false;\n };\n postgres = {\n path = \"/opt/postgres\";\n read_only = false;\n };\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"ens2\";\n interface.advertise = \"ens2\";\n extraConfig = {\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n #client_addr = \"127.0.0.1 192.168.1.235\";\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n # Create a directory for Traefik to store its data (tls certs, etc.)\n \"d /opt/traefik 0755 root root -\"\n # Create a directory for Postgres to store its data\n \"d /opt/postgres 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n\n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" + "configuration_content": "{ config, lib, pkgs, ... }:\n{\n imports =\n [ # Include the results of the hardware scan.\n ./hardware-configuration.nix\n ];\n\n nixpkgs.config.allowUnfree = true;\n\n # Use the systemd-boot EFI boot loader.\n boot.loader.systemd-boot.enable = true;\n boot.loader.efi.canTouchEfiVariables = true;\n\n networking.hostName = \"jaglan-beta-m20\"; # Define your hostname.\n\n time.timeZone = \"Australia/Melbourne\";\n\n # List packages installed in system profile. To search, run:\n # $ nix search wget\n # environment.systemPackages = with pkgs; [\n # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.\n # wget\n # ];\n\n # Some programs need SUID wrappers, can be configured further or are\n # started in user sessions.\n # programs.mtr.enable = true;\n # programs.gnupg.agent = {\n # enable = true;\n # enableSSHSupport = true;\n # };\n\n # List services that you want to enable:\n services = {\n nomad = {\n enable = true;\n enableDocker = true;\n dropPrivileges = false;\n settings = {\n datacenter = \"jaglan-beta\";\n server = {\n enabled = true;\n };\n client = {\n enabled = true;\n host_volume = {\n };\n cni_path = \"${pkgs.cni-plugins}/bin\";\n };\n plugin.docker.config.allow_privileged = true;\n };\n extraPackages = with pkgs; [\n cni-plugins\n consul\n ];\n };\n consul = {\n enable = true;\n webUi = true;\n interface.bind = \"ens2\";\n interface.advertise = \"ens2\";\n extraConfig = {\n client_addr = \"{{ GetPrivateInterfaces | exclude \\\"type\\\" \\\"ipv6\\\" | join \\\"address\\\" \\\" \\\" }} {{ GetAllInterfaces | include \\\"flags\\\" \\\"loopback\\\" | join \\\"address\\\" \\\" \\\" }}\";\n server = true;\n retry_join = [\n \"jaglan-beta-m01\"\n \"jaglan-beta-m20\"\n ];\n datacenter = \"jaglan-beta\";\n connect.enabled = true;\n ports.grpc = 8502;\n };\n };\n openssh = {\n enable = true;\n settings.PermitRootLogin = \"yes\";\n };\n };\n\n systemd.tmpfiles.rules = [\n # Fix issue where nomad needs alloc_mounts to be writable\n \"d /var/lib/alloc_mounts 0755 root root -\"\n ];\n\n # Open ports in the firewall. 80/443 are for HTTP/HTTPS (terraform), 464X are the default ports for Nomad, 830X are the default ports for Consul.\n networking.firewall.allowedTCPPorts = [ 80 443 4646 4647 4648 8300 8301 ];\n networking.firewall.allowedUDPPorts = [ 8301 ];\n\n # Copy the NixOS configuration file and link it from the resulting system\n # (/run/current-system/configuration.nix). This is useful in case you\n # accidentally delete configuration.nix.\n system.copySystemConfiguration = true;\n \n # Defines the initial NixOS version for compatibility with older application data.\n # Do NOT change this value after installation without careful consideration.\n system.stateVersion = \"24.11\"; # Did you read the comment?\n}\n" } }, "sensitive_attributes": []